Sanyo MP3 Player Accessories VCA 35E User Guide

INSTRUCTIONS  
AC adaptor  
VCA-35E  
Before installing and using the unit, please read these  
instruction carefully. Be sure to keep it handy for later  
reference.  
Before using this unit, please check all the connected  
devices power supply specifications. Depending on the type  
of connected devices, this unit may not operate properly.  
PRECAUTIONS  
In case of problem  
Do not use the unit if smoke or a strange odour comes from the  
unit, or if it seems not to function correctly. Disconnect the power  
cord immediately, and consult your dealer (or a Sanyo Authorized  
Service Centre).  
Do not open or modify  
CONNECTIONS  
Do not open the cabinet, as it may be dangerous and cause  
damage to the unit. For internal settings and repairs, consult your  
dealer (or a Sanyo Authorized Service Centre).  
1 Connect the power output cable (+, ) from the AC  
adaptor to the DC input terminals on the camera.  
NOTE: Be sure to carefully check the polarity of the  
power output cable in order to make the proper  
connections. (Please refer to the illustration on  
the rating label.)  
Do not put objects inside the unit  
Make sure that no metal objects or flammable substance get inside  
the unit. If used with a foreign object inside, it could cause a fire,  
short-circuits or damages.  
If water or a liquid gets inside the unit, disconnect the power cord  
immediately, and consult your dealer (or a Sanyo Authorized  
Service Centre). Be careful to protect the unit from rain, sea water,  
etc.  
2 Insert the plug of this power supply into a wall outlet.  
When finished  
Unplug the AC adaptor from the wall outlet, then  
disconnect the power output cable from the camera.  
Be careful when handling the unit  
To prevent damages, do not drop the unit or subject it to strong  
shock or vibration.  
SPECIFICATIONS  
Protect from humidity and dust  
Input voltage  
Power output  
: AC 220 ~ 230 V, 50 Hz  
: DC 15 V 600 mA  
To prevent damages to the unit, do not install it where there is  
greasy smoke or steam, where the dampness may get too high, or  
where there is a lot of dust.  
Power consumption : 17 VA max.  
Operating environment temperature  
: –10˚C to 50˚C  
Protect from high temperatures  
Do not install close to stoves, or other heat generating devices,  
such as spotlights, etc., or where it could be subject to direct  
sunlight, as that could cause deformation, discoloration or other  
damages.  
Dimensions  
Weight  
: 68 (W) x 62 (H) x 100 (D) mm  
: Approx. 680 g  
DIMENSIONS: mm  
Be careful when installing close to the ceiling, in a kitchen or boiler  
room, as the temperature may raise to high levels.  
Install where the temperature range will stay between –10˚C and  
50˚C. (no condensation)  
Power output cable  
62  
Cleaning  
100  
Dirt can be removed from the cabinet by wiping it with a soft  
cloth. To remove stains, wipe with a soft cloth moistened with a  
soft detergent solution and wrung dry, then wipe dry with a dry  
soft cloth.  
68  
Do not use benzine, thinner or other chemical product on the  
cabinet, as that may cause deformation and paint peeling.  
Before using a chemical cloth, make sure to read all  
accompanying instructions. Make sure that no plastic or rubber  
material comes in contact with the cabinet for a long period of  
time, as that may cause damage or paint peeling.  
Features and specifications are subject to change without  
prior notice or obligations.  
 

RAD Data comm IP Phone Vmux 2100 User Guide
Radio Shack Scanner PRO 2050 User Guide
RCA Projection Television HD44LPW164 User Guide
Roberts Radio Clock Radio CR9946 User Guide
RocketFish Indoor Furnishings RF TVMFM01 User Guide
Saitek Mouse M40T User Guide
Samsung DVD Player DVD V9800 User Guide
Samsung DVR SRD 873D User Guide
Sanyo Battery Charger Lithium ion User Guide
Sceptre Technologies Flat Panel Television E195BD SHD User Guide