Dual Arm Monitor Stand for LCD/LED Displays
RHMS-11002
User Manual
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step 1 –Attach base assembly to desk
A : Desk Clamp 0.6＂（16mm）＜board depth <2.75＂(70mm)
2
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
B : Through-Desk 1＂(25.4mm)diameter<=2.95＂(75mm)
You need disassemble the base［02］ assembly at first ,then assembling again according to the
following pic
C: Grommet Hole 2.95＂(75mm)<=hole diameter<=3.9＂(100mm)
3
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
D: Side Mount
board depth >2.95＂（75mm）and no mount hole
Step 2 –Insert the mount arm[02] to base[01]
WARNING:TIGHTENING TORQUE[01-d] BEFORE INSERT THE MOUNT
4
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step 3 –Lcd mornitor assembling
Insert the hand screw [08],through the mount board[01-a] , into the threaded hole in the back
of the monitor and lock it.
Step 4 –Adjusted the rotating friction
As following chart ,adjusting the tightness of head,middle and base location, insert the
attached wrench [0A]into the lock screw to keep proper friction during rotation .
5
Dual Arm Monitor Stand for LCD/LED Displays RHMS-11002
User Manual
Step5 –Cables placement
Route the cables through the clip [02-b] under the arm and [01-c] on the pole
Thank you for purchasing a quality Rosewill Product.
6
|